Squaring a trailer axle is a crucial maintenance task that ensures the proper alignment of the wheels, promoting better towing performance and stability. Over time, factors such as heavy loads, rough terrains, and accidents can cause the axle to become misaligned, leading to uneven tire wear and reduced handling. In this guide, we will walk you through the step-by-step process to square a trailer axle and keep your trailer running safely and smoothly.
Jack or jack stands
Tape measure
Wrench or socket set
Level
American Car Transport Trailer Tyre Axle
Park the trailer on a level surface and engage the parking brake. Ensure the trailer is properly supported using jacks or jack stands to prevent any accidental movement during the process.
Measure the distance between the center of the tires on one side of the trailer. Write down this measurement for reference. Repeat the measurement on the other side of the trailer.
Measure the distance from the center of one tire on the front side to the center of the tire on the opposite side of the rear. Write down this measurement. Repeat the measurement from the center of the other front tire to the center of the opposite rear tire.
Disc Brake Wheel Axle For Semi Trailer-new
Compare the measurements obtained in steps 2 and 3. The measurements between the center of the tires on both sides of the trailer should be the same. Likewise, the diagonal measurements should also be equal.
If the measurements are not equal, it indicates that the axle is out of square and needs adjustment. To adjust the axle, you may need to loosen the U-bolts or brackets that hold the axle in place. Use a wrench or socket set for this task.
With the U-bolts or brackets loosened, gently push or pull the axle until the measurements become equal on both sides. Use a level to ensure the axle is straight and properly aligned. Once the axle is aligned, tighten the U-bolts or brackets securely to hold it in place.
German Spoke Axle For Truck Tyre
After adjusting and aligning the axle, recheck the measurements to ensure both the distance between the tires and the diagonal measurements are now equal. This step ensures that the axle is correctly squared.
After squaring the axle, take the trailer for a test drive to evaluate its towing performance. Pay attention to how the trailer handles and whether it tracks straight on the road. If you notice any issues, recheck the measurements and alignment.
Squaring a trailer axle is a simple yet essential maintenance task to ensure the proper alignment and optimal performance of your trailer. By following these steps and regularly inspecting and adjusting the axle as needed, you can enjoy safer and smoother towing experiences while extending the life of your trailer's tires and components.
Foshan Yonglitai Axle Co., Ltd offeres various technical specifications in order to fit the demands of different clients.
We have a wide selection at good prices to help you get creative. All the Yonglitai axles are quality guaranteed. If you have any questions, please feel free to contact us.
